FORUM Syndrome-OC - Jacky-PC


  Commandes Groupées


  [CG- CLOSED] Waterblocks CasCades /!\ MP de Confirmation/!\

 




Il y a 31 utilisateurs connus et inconnus. Pour voir la liste des connectés connus, cliquez ici

 Mot :   Pseudo :  
 
 Page :  1  2
Page Précédente 
Auteur Sujet :

[CG- CLOSED] Waterblocks CasCades /!\ MP de Confirmation/!\

n°33924
tigui
Posté le 24-06-2003 à 22:14:17  profilanswer
 

Bonjour a tous
 
avec plusieurs forumeurs nous allons effectuer une CG pour des Waterblocks cascades
 
 
voila les photos du prototype:
http://www.employees.org/~slf/c2/c22.jpg
http://www.employees.org/~slf/c2/c25.jpg
http://www.employees.org/~slf/c2/c26.jpg
http://www.employees.org/~slf/c2/c27.jpg
http://www.employees.org/~slf/c2/c28.jpg
http://www.employees.org/~slf/c2/c210.jpg
 
et maintenant la version finale:
http://www.employees.org/~slf/cascade/cf2.jpg
 
 
la plaque grise est la FIX pour P4:) mais le WB peut etre mis sur AMD sans probleme:)
 
 
 
Pour la descriptions et tests:


SUR LES TESTS C EST LE WB "Little river" QUI EST TESTé ET NON LA CASCADE MAIS CELUI-CI DANS LES MEMES CONDITIONS FAIT GAGNER 1-2 DEGRES
 
Le prix avoisinera les 70€  
 
Le principal Responsable de la CG sera flo850 mais il ne sera réellement disponible qu'à partir du 7 juillet  
Pour le moment on recense les personnes interessées
 
Voila c est tout pour le moment
 
PS:- si il y a des fautes, des phrases qui ne veulent rien dire ... vous avez le droit de prevenir (il doit y en avoir un paquet^^)
 
 
EDIT 1 :CG basée principalement sur HFR  
Dispo sur HFR,JPC,Nokytech
 
EDIT 2 : Quelques renseignements supplémentaires:

  • environ 20% de perte de debit par rapport a un maze 3

une pompe de 600L/H suffit pour un cascade + un autre bloc
mais si il y a d'autres blocs , il vaut mieux une 1200 L/H

  • Diametre 12mm
  • sa marge de manoeuvre est faible , mais pour 10 blocks il pourra surement faire un petit quelque chose
  • les prix finaux dans une semaine
  • Possibilité de zapper la TVA en faisant passer le colis pour un cadeau:)


Message édité par tigui le 05-07-2003 à 23:01:23
mood
Google
Posté le 24-06-2003 à 22:14:17  profilanswer
 

n°33925
tigui
Posté le 24-06-2003 à 22:17:31  profilanswer
 

INTERESSéS:
HFR:
TiGui^^ AMD/XP-64/P4 selon prix :whistle:  
flo850 AMD/P4
niiizzzz AMD
alkurun AMD/P4
Necris AMD     si pas sup a 75€
Iguana
 
JPC:
Jayz
 
Noky:
fujiyama  P4
7h0r
Kaplan AMD
Mp6  AMD
sebscholler AMD
robbynaish
mastaba ( noky  
robbynaish AMD / XP 64 / possibilité de demander en double sortie??
Mastaba P4
deundeun AMD
MadCowAss AMD
 
Clubic:
rouggy
pasdebip  
 
TOTAL: 20 Blocks :sol:


Message édité par tigui le 26-06-2003 à 22:18:45
n°33939
M4vrick
Inventeur de la Watercase
Posté le 24-06-2003 à 22:37:35  profilanswer
 

Dit donc.. a force de gagner 1-2°C a chaque fois qu'un nouveau block sort.. on vas arriver sous la temp ambiante  :lol:  
 
Serieusement.. attend qq tests avant d'annoncer une amelioration de perfs ... c pas que j'ai pas confiance en cathar mais son block est a peine construit qu'il annonce des la premiere version des super perfs.. c un peu gros
 
Enfin sinon bonne chance pour la CG :jap:   moi je vait miser sur un zytra.. c deja pas mal je pense


---------------
--== M4vr|ck ==--  Le Tuning jusqu'au bout des cables
Flea Award 2003 de la machine la plus artistique au PC Tuning Show
n°33945
tigui
Posté le 24-06-2003 à 22:51:18  profilanswer
 

M4vrick a écrit :

Dit donc.. a force de gagner 1-2°C a chaque fois qu'un nouveau block sort.. on vas arriver sous la temp ambiante  :lol:  
 
Serieusement.. attend qq tests avant d'annoncer une amelioration de perfs ... c pas que j'ai pas confiance en cathar mais son block est a peine construit qu'il annonce des la premiere version des super perfs.. c un peu gros
 
Enfin sinon bonne chance pour la CG :jap:   moi je vait miser sur un zytra.. c deja pas mal je pense

ba il a deja un block de fai (derniere photo) donc il a du avoir quelques tests
sinon je le prends aussi pour l aspect^^
merci pour l encouragement, j espere que tout ce passera bien:)  
et le zytra aussi a l air beau c est clair;)

n°33989
tigui
Posté le 25-06-2003 à 05:43:19  profilanswer
 
n°34061
tigui
Posté le 25-06-2003 à 14:18:26  profilanswer
 
n°34073
jayz
Zavez jamais vu la lumière ?
Posté le 25-06-2003 à 15:16:45  profilanswer
 

heu juste une question...
 
La version présenté ici est celle que cathar produira lui meme (environ 150 exemplaire comme le LRWW je suppose...) ou alors il s'agit de la version commerciale de D-tek a qui Cathar a revendu la license ?
 
Parce que le LRWW made in D-tek devais sortir ya 15 jours et viens encore d'etre reporté d'une semaine :sarcastic:


Message édité par jayz le 25-06-2003 à 15:17:01

---------------
504 coupé 2L 72, miata NA 1.8L 96, what else ? || ~FBT~ Full Barouf Team || Tout à l'arrière, tout en travers... Tout à l'avant, qu'est ce que c'est chiant ! || Da Pwiit Staÿle ||
n°34083
tigui
Posté le 25-06-2003 à 16:05:12  profilanswer
 

Jayz a écrit :

heu juste une question...
 
La version présenté ici est celle que cathar produira lui meme (environ 150 exemplaire comme le LRWW je suppose...) ou alors il s'agit de la version commerciale de D-tek a qui Cathar a revendu la license ?
 
Parce que le LRWW made in D-tek devais sortir ya 15 jours et viens encore d'etre reporté d'une semaine :sarcastic:

on demande direct a cathar normalement  
je demande confirmation ce soir;)


---------------
:love:COMMANDE GROUPEE DE WATERBLOCKS CASCADES[:aras qui rit]
n°34085
jayz
Zavez jamais vu la lumière ?
Posté le 25-06-2003 à 16:06:22  profilanswer
 

tigui a écrit :

on demande direct a cathar normalement  
je demande confirmation ce soir;)


 
Ok dans ce cas la, un pour moi, direct [:xp1700]


---------------
504 coupé 2L 72, miata NA 1.8L 96, what else ? || ~FBT~ Full Barouf Team || Tout à l'arrière, tout en travers... Tout à l'avant, qu'est ce que c'est chiant ! || Da Pwiit Staÿle ||
n°34179
tigui
Posté le 25-06-2003 à 19:56:46  profilanswer
 

Jayz a écrit :


 
Ok dans ce cas la, un pour moi, direct [:xp1700]  

c est cathar;)
je t ajoute a la liste;)


---------------
:love:COMMANDE GROUPEE DE WATERBLOCKS CASCADES[:aras qui rit]
n°34216
tigui
Posté le 25-06-2003 à 22:02:42  profilanswer
 

precisez la fix SVP :hello:


---------------
:love:COMMANDE GROUPEE DE WATERBLOCKS CASCADES[:aras qui rit]
n°34221
Kaplan
Posté le 25-06-2003 à 22:08:59  profilanswer
 

Salut,
 
Un waterblock conçu et réalisé par Cathar himself ça me tente trop!!!  :love:  
 
Je suis avec vous les gars !  :jap:  
 
Pour moi ça sera donc :  

Code :
  1. 1 x Cascade avec fix AMD


 
P.S. : Je passait par ici, mais je suis + svt sur Noky :hello:


Message édité par Kaplan le 25-06-2003 à 22:09:58
n°34228
tigui
Posté le 25-06-2003 à 22:27:56  profilanswer
 

Kaplan a écrit :

Salut,
 
Un waterblock conçu et réalisé par Cathar himself ça me tente trop!!!  :love:  
 
Je suis avec vous les gars !  :jap:  
 
Pour moi ça sera donc :  

Code :
  1. 1 x Cascade avec fix AMD


 
P.S. : Je passait par ici, mais je suis + svt sur Noky :hello:

c est noté :jap:  ;)


---------------
:love:COMMANDE GROUPEE DE WATERBLOCKS CASCADES[:aras qui rit]
n°34258
jayz
Zavez jamais vu la lumière ?
Posté le 25-06-2003 à 23:37:38  profilanswer
 

Jayz a écrit :


 
Ok dans ce cas la, un pour moi, direct [:xp1700]  


fix amd aussi  :)
Si c'est possible d'avoir celle pour P4 en meme temps (moyennant €€€) sa m'interresse  :D


---------------
504 coupé 2L 72, miata NA 1.8L 96, what else ? || ~FBT~ Full Barouf Team || Tout à l'arrière, tout en travers... Tout à l'avant, qu'est ce que c'est chiant ! || Da Pwiit Staÿle ||
n°34259
phlauran
anciennement flo850
Posté le 25-06-2003 à 23:39:15  profilanswer
 

c possible  
et apriori ca devrait pas etre bcp plus cher

n°34294
pierrotlem​aboule
TsUbAmE gAeShI !!!!!
Posté le 26-06-2003 à 02:05:52  profilanswer
 

tient d'apres les tests de cathar la cascade etait moins bon k le little river :??:  
peut etre ki l'as des modif entre-temps


---------------
vend WC + Alim + DVD Animes
n°34310
phlauran
anciennement flo850
Posté le 26-06-2003 à 07:26:05  profilanswer
 

j'ai parcouru le (gros) topic de procooling  
effectivement au debut il etait decu des perfs du cascade

Citation :

Anyway, the block is presently being tested. At present it's testing at about 0.5C worse than the White Water, but this is a fresh application of Arctic Silver 3. The White Water's temps were taken after 2 days of the thermal paste "settling in", and typically 1C or so is gained after an initial overnight "burn-in". This makes testing somewhat slow and painful, but I guess that this helps to give a clearer idea of final performance. I'll find out tomorrow if the design really does exceed the White Water for cooling performance. I have a number of bases with differing hole/cup geometries to try, so it's going to be a few weeks of testing to isolate the best base setup.


 
mais par la suite  
ca s'ameliore :

Citation :

I scrapped that entire testing procedure and started again as I decided it was too prone to non-repeatability errors. Waiting for some indeterminate period of time for the AS3 to settle/cure was giving me the proverbial .....
 
I retested using regular white goop, which yields about the same initial temperatures as AS3, but AS3 does gain over time as it cures.
 
Retesting and remounting the White Water and the Cascade 8 times so far in alternation to greatly reduce the chance of any single or even a short run of mounting errors from skewing results, I've come to the following results.
 
The Cascade use experimental base #1 is better than experimental base #2 and #3 by around 0.5C and 1.0C respectively. This is extremely promising as there's a pattern to the order of the bases and it gives me an idea of what is the right direction to be heading.
 
Compared to the White Water, Cascade base #1 is marginally (and I do mean marginal) better than the White Water. We're talking statistically inseparable given the limitations of my test setup, but if I had to pick one, I'd say the Cascade was ever so slightly ahead.
 
Using these results this gives me great insight on how I should move forwards to further refine the design.
 
There's still quite a number of things to do to tweak it to the max. The jet plate I'm presently using has some issues due to the material use and how it reacted after machining. The machinists have made a new jet plate out of a better machining-friendly polycarb, and this will help to fix some of the irregularities in the plate I'm presently using too.
 
Of course, it could be that there's very little left to gain. Only time and further refining will tell.


 
avec comme seule difference :

Citation :


quote:
--------------------------------------------------------------------------------
Originally posted by JCYC5  
Do you have pictures you can post of each base?
 
I want to know what the differences are  
--------------------------------------------------------------------------------
 
 
 
Different sized holes.


 
enfin dans le premiere mail qu'il m'a envoyé il me parle du cascade comme faisant 1.5-2 degres de mieux que le lrww


Message édité par phlauran le 26-06-2003 à 07:38:03
n°34312
phlauran
anciennement flo850
Posté le 26-06-2003 à 07:35:15  profilanswer
 

et lepost que je cherhais page 5

Citation :

Has a few issues with the holes not being drilled cleanly. I've talked with the machinists on this and will be getting a new plate made up using a different material and revised machining procedure that should fix the issues. Have plugged it in though and on the first go is achieving ~1.5C better than the WW, even with the clogged nozzles. Gotta head off to grab a drill bit and clear up the swarf binding issues with the holes on this one and will retry.
 


meme avec un petit pb de finition ,on est 1.5 degres de mieux que le lrww
 
PS phlauran@ppc = flo850@onoky/hfr/clubic
 
 
deux trois auters posts interessants:

Citation :


 
quote:
--------------------------------------------------------------------------------
Originally posted by leejsmith  
how well would this work on a p4 system ?
 
from the pictures it looks like the tubes are the same length as the polycarb is thick or is the o-ring lifting the polycarb of the desktop and the tubes are longer but you just cant see it.
 
would it be possible for you to post some pics of the jets in action without the base plate.
 
--------------------------------------------------------------------------------
 
 
 
Should work well on a P4 system in the same way that the White Water works well on a P4. It's not necessary to focus on cooling the entire 30x30mm area. The jet cups cool the hottest section of the CPU. The oval cavity is 30mm wide and not very deep. The out-flow from the cups practically races across the surface of the copper acting somewhat like what we've come to expect from standard maze-designs in terms of cooling in this area. This means that the block is capable of offering focussed cooling where it's most needed, and still offers good cooling for residual heat. The Cascade block would make a half decent TEC block, unlike the White Water.


 

Citation :

As a result, the block is now much more free flowing than before, and has picked up some performance as a result.
 
Straight away on the first remount I'm seeing a full 2.0C clear lead over the best result I had previously gotten with the White Water over 12 mounts of that block. This is using a T'Bred B at 2400MHz/1.85v running BurnK7. This is significant because it was my design goal to gain a full 2C, and secondly, it's just the first time I've mounted the block. History tells me that I rarely get it right first time, so there may be a little bit more hiding there as I remount to test again.
 
I snapped some pictures of the jet tubes in action without the base-plate using an Eheim 1048, and a close-up of the assembled block which is intended to highlight that the jet tubes actually do go some way into the cup holes, as some people have mentioned that it wasn't that clear what was going on there.
 


Message édité par phlauran le 26-06-2003 à 07:36:09
n°34313
tigui
Posté le 26-06-2003 à 07:41:00  profilanswer
 

:love:

n°34375
phlauran
anciennement flo850
Posté le 26-06-2003 à 12:40:07  profilanswer
 

:bounce:

n°34449
phlauran
anciennement flo850
Posté le 26-06-2003 à 17:01:40  profilanswer
 

:bounce:

n°34576
tigui
Posté le 26-06-2003 à 21:52:58  profilanswer
 
n°34583
M4vrick
Inventeur de la Watercase
Posté le 26-06-2003 à 22:04:33  profilanswer
 

Du calme... c un UP par jour maximum... ca serais dommage de se faire reprimander pour ca :)


---------------
--== M4vr|ck ==--  Le Tuning jusqu'au bout des cables
Flea Award 2003 de la machine la plus artistique au PC Tuning Show
n°34589
tigui
Posté le 26-06-2003 à 22:19:17  profilanswer
 

M4vrick a écrit :

Du calme... c un UP par jour maximum... ca serais dommage de se faire reprimander pour ca :)

c est ecrit ou sa?? :heink:


---------------
:love:COMMANDE GROUPEE DE WATERBLOCKS CASCADES[:aras qui rit]
n°34595
M4vrick
Inventeur de la Watercase
Posté le 26-06-2003 à 22:29:04  profilanswer
 

Arf.. c plus marqué dans les regles... bon ben j'ai rien dit... désolé


---------------
--== M4vr|ck ==--  Le Tuning jusqu'au bout des cables
Flea Award 2003 de la machine la plus artistique au PC Tuning Show
n°34597
jayz
Zavez jamais vu la lumière ?
Posté le 26-06-2003 à 22:31:49  profilanswer
 

M4vrick a écrit :

Arf.. c plus marqué dans les regles... bon ben j'ai rien dit... désolé


 
k-sayyyy  [:jayz]  
 
Bon plus sérieusement tu repond sur IRC pliz  :ange:


---------------
504 coupé 2L 72, miata NA 1.8L 96, what else ? || ~FBT~ Full Barouf Team || Tout à l'arrière, tout en travers... Tout à l'avant, qu'est ce que c'est chiant ! || Da Pwiit Staÿle ||
n°34598
tigui
Posté le 26-06-2003 à 22:32:07  profilanswer
 

M4vrick a écrit :

Arf.. c plus marqué dans les regles... bon ben j'ai rien dit... désolé

:sol:


---------------
:love:COMMANDE GROUPEE DE WATERBLOCKS CASCADES[:aras qui rit]
n°34719
phlauran
anciennement flo850
Posté le 27-06-2003 à 12:55:20  profilanswer
 

up

n°35166
phlauran
anciennement flo850
Posté le 29-06-2003 à 09:34:24  profilanswer
 


voici les prix , sans reduction
 
i y a eu une maj depuis mon dernier passage sur le site http://www.employees.org/~slf/lrwb/
tout d'abord les prix :  
1 AUD = 0,583635 EUR   1 EUR = 1,71340 AUD  
 
$128 AUD 75€- AMD Socket A Cascade CPU Waterblock  
Includes 4-hole mounting kit. Can be converted to mount onto a P4 Socket 478 system with the optional Aluminium P4 mounting bracket.  
   http://www.employees.org/~slf/lrwb/cascade-amd.jpg
$130 AUD 76€ - Intel P4 Socket 478 Cascade CPU Waterblock  
includes 4-hole mounting kit. Cannot be mounted on an AMD system unless the top plate is changed. This option discards the need for the Aluminium Intel P4 Socket 478 mounting bracket seen below.  
   http://www.employees.org/~slf/lrwb/cascade-p4.jpg
$145 AUD 83€- AMD Socket A Cascade CPU Waterblock + Aluminium P4 Socket 478 mounting bracket  
Includes 4-hole mounting kit. Can be converted to an AMD mountable block by removing the Aluminium Intel P4 Socket 478 mounting bracket.  
   http://www.employees.org/~slf/lrwb/cascade-adapt.jpg
$17 AUD 9.9€- Aluminium P4 mounting bracket  
Includes longer clamping screws and stand-off washers. Allows an AMD Socket A Cascade block to be mounted onto an Intel P4 Socket 478 system.  
   http://www.employees.org/~slf/lrwb/cascade-plate.jpg
$20 AUD  11.8€[/B]- Polycarbonate Cascade AMD Socket A Top Plate  
Allows an Intel P4 Socket 478 Cascade block to be converted to an AMD Socket A block by replacing the top plate.  
   http://www.employees.org/~slf/lrwb/cascade-amdtop.jpg
$22 AUD  [g]13.8€
- Polycarbonate Cascade Intel P4 Socket 478 Top Plate  
Allows an AMD Socket A Cascade block to be converted to an Intel P4 Socket 478 block by replacing the top plate.  
   http://www.employees.org/~slf/lrwb/cascade-p4top.jpg
$8 AUD 4.66€ - 4-hole mounting kit  
Allows waterblocks using the 4-hole mounting method to be mounted on either Intel or AMD boards. Includes 60mm steel bolts, nylon washers, 24mm long springs rated at 6kg/cm of compression, metal washers, nuts, and wing-nuts.  
 
http://www.employees.org/~slf/lrwb/cascade-mountkit.jpg

n°35577
jayz
Zavez jamais vu la lumière ?
Posté le 01-07-2003 à 00:01:22  profilanswer
 

:bounce:  
 
toujours partant en ce qui me concerne :)


---------------
504 coupé 2L 72, miata NA 1.8L 96, what else ? || ~FBT~ Full Barouf Team || Tout à l'arrière, tout en travers... Tout à l'avant, qu'est ce que c'est chiant ! || Da Pwiit Staÿle ||
n°36414
phlauran
anciennement flo850
Posté le 04-07-2003 à 19:29:35  profilanswer
 

je lanceri la confirmation dasn le week end

n°36416
tigui
Posté le 04-07-2003 à 19:48:37  profilanswer
 

phlauran a écrit :

je lanceri la confirmation dasn le week end

ok sa sera plus simple car je serai dispo ce week end;)

n°36419
jayz
Zavez jamais vu la lumière ?
Posté le 04-07-2003 à 20:26:18  profilanswer
 

phlauran a écrit :

je lanceri la confirmation dasn le week end


 [:xp1700]


---------------
504 coupé 2L 72, miata NA 1.8L 96, what else ? || ~FBT~ Full Barouf Team || Tout à l'arrière, tout en travers... Tout à l'avant, qu'est ce que c'est chiant ! || Da Pwiit Staÿle ||
n°36432
hamburger ​de snark
Posté le 04-07-2003 à 21:56:03  profilanswer
 

M4vrick a écrit :

Dit donc.. a force de gagner 1-2°C a chaque fois qu'un nouveau block sort.. on vas arriver sous la temp ambiante  :lol:  
 
Serieusement.. attend qq tests avant d'annoncer une amelioration de perfs ... c pas que j'ai pas confiance en cathar mais son block est a peine construit qu'il annonce des la premiere version des super perfs.. c un peu gros
 
Enfin sinon bonne chance pour la CG :jap:   moi je vait miser sur un zytra.. c deja pas mal je pense


 
le bloc n'est pas grand.
 
cliquettent ici  
http://forums.overclockers.com.au/ [...] ost2096804
 
fortement recommandé!


Message édité par hamburger de snark le 04-07-2003 à 21:59:07
n°36436
Kevinou
Posté le 04-07-2003 à 22:05:51  profilanswer
 

J hesitais a prendre ce wb ou a attendre le zb mais j vais prendre celui la.
Si les tests du zb sont concluants j le prendrtai quand meme.
 
Alors je vais prendre un

Code :
  1. wb amd


 
Oila !!

n°36641
tigui
Posté le 05-07-2003 à 23:10:07  profilanswer
 

:bounce:

n°37850
jayz
Zavez jamais vu la lumière ?
Posté le 11-07-2003 à 22:19:09  profilanswer
 

:bounce: on en est ou ? :)


---------------
504 coupé 2L 72, miata NA 1.8L 96, what else ? || ~FBT~ Full Barouf Team || Tout à l'arrière, tout en travers... Tout à l'avant, qu'est ce que c'est chiant ! || Da Pwiit Staÿle ||
n°37900
phlauran
anciennement flo850
Posté le 12-07-2003 à 08:49:24  profilanswer
 

16 confirmation par mail
il faut me renvoyer ce formulaire par mail  
lundi j'envoi mes coordonnées avec le prix final et je cloture els reservations


Message édité par phlauran le 12-07-2003 à 08:50:46
n°38094
tigui
Posté le 13-07-2003 à 19:45:04  profilanswer
 

http://membres.lycos.fr/cefteam/Tigui1.gifhttp://membres.lycos.fr/cefteam/Tigui1.gifhttp://membres.lycos.fr/cefteam/Tigui1.gifhttp://membres.lycos.fr/cefteam/Tigui1.gifhttp://membres.lycos.fr/cefteam/Tigui1.gifhttp://membres.lycos.fr/cefteam/Tigui1.gifhttp://membres.lycos.fr/cefteam/Tigui1.gifhttp://membres.lycos.fr/cefteam/Tigui1.gifhttp://membres.lycos.fr/cefteam/Tigui1.gifhttp://membres.lycos.fr/cefteam/Tigui1.gif

n°38209
phlauran
anciennement flo850
Posté le 14-07-2003 à 23:16:13  profilanswer
 

que cux qui n'ont pas encore recu de mail me renvoient le forumlaire a flo850@free.fr

mood
Google
Posté le 14-07-2003 à 23:16:13  profilanswer
 

 Page :  1  2
Page Précédente 

Aller à :
Ajouter une réponse

  FORUM Syndrome-OC - Jacky-PC


  Commandes Groupées


  [CG- CLOSED] Waterblocks CasCades /!\ MP de Confirmation/!\

 

Hit Parade